Cooling water tower sludge remover is a chemical agent used to remove dirt and sludge adhering to the inner wall of the cooling water tower. In the cooling water circulation system, due to the circulation of water and the cooling effect of warm air, the water will contain various suspended solids, microorganisms, and other impurities, which will gradually deposit on the inner wall of the cooling water tower, forming sticky mud. The presence of sticky mud can reduce the heat dissipation efficiency of the cooling water tower, increase energy consumption, and may lead to internal corrosion and bacterial growth in the cooling water tower.
The main functions of the cooling water tower slime remover are:
Removing slime: The active ingredients in the slime stripping agent can react chemically with the slime, causing it to loosen and dissolve. This can effectively remove dirt and sludge on the inner wall of the cooling water tower.
Cleaning the cooling water tower: The adhesive stripping agent can be used in conjunction with the cleaning equipment to flush loose adhesive out of the cooling water tower through water flow and mechanical brushing. This can thoroughly clean the interior of the cooling water tower, restore its heat dissipation effect and normal operation.
Prevent bacterial growth: Some slime stripping agents also have antibacterial effects, which can effectively inhibit the growth of bacteria in the cooling water tower. This can reduce corrosion and water pollution caused by bacteria.
It should be noted that when using the cooling water tower adhesive stripping agent, an appropriate amount of stripping agent should be used according to the recommendations in the product manual and strictly follow the operating procedures. Meanwhile, corresponding safety measures should be taken during use to avoid harm to personnel and the environment. In addition, regular cleaning and maintenance of the cooling water tower are also important measures to ensure its normal operation.