Circulating water cleaning pre film agent refers to a chemical additive used to clean deposits, dirt, and pollutants in the circulating water system and form a thin film to prevent new dirt deposition.
The following are the general usage methods and precautions for circulating water cleaning pre film agents:
Determine the appropriate dosing concentration: Determine the dosing concentration based on the scale and pollution level of the circulating water system, and according to the product manual or recommended dosage.
Cleaning the circulating water system: Add the pre film agent to the circulating water system and start the system for cleaning. The pre film agent will react with dirt and sediment, dissolve or disperse them, making them easy to be washed away.
Control cleaning time and temperature: According to the recommendations in the product manual, control the cleaning time and temperature. Long or short cleaning times may affect the cleaning effect, and excessively high temperatures may cause unnecessary evaporation and volatilization.
Check the quality of discharged water: During the cleaning process, the quality of discharged water should be regularly checked to ensure that it meets environmental protection requirements. If necessary, additional treatment measures can be taken to treat the discharged water.
Attention to safety operation: When using circulating water to clean the pre film agent, please wear appropriate personal protective equipment, such as gloves, goggles, and masks, to avoid direct contact or inhalation of chemicals.
Follow the product instructions: Before using circulating water to clean the pre film agent, please read the product manual carefully and use it correctly according to the instructions. Pay attention to dilution ratio, dosing method, and precautions.
Please note that different circulating water systems and pre film agents may vary. Therefore, it is recommended to refer to the specific product instructions and consult relevant professionals before use to ensure correct use and achieve the expected cleaning effect.