The Pool Time MaxBlue Algicide is a highly effective product used to control and prevent algae growth in swimming pools. When using this product, it’s important to follow the manufacturer’s instructions carefully to ensure proper dosage and safe application. Below are general guidelines for how much MaxBlue Algicide to use:
Initial Application (When Algae is Present):
- For visible algae: Use 16 fluid ounces (473 ml) of MaxBlue Algicide for every 10,000 gallons (37,854 liters) of pool water.
- Make sure to brush the pool surfaces and run the filtration system continuously to help eliminate the algae.
- After adding, wait at least 24 hours before re-entering the pool, depending on chlorine levels and algae presence.
Maintenance Dosage (Preventive Treatment):
- Weekly prevention: Use 1-1/3 fluid ounces (39 ml) of MaxBlue Algicide per 10,000 gallons (37,854 liters) of pool water once a week.
- This will help keep algae from growing and maintain clear, algae-free water.
Heavy Usage or High Temperatures:
- In high-demand conditions (e.g., during periods of high pool usage, heavy rain, or high temperatures), you may increase the maintenance dose slightly to provide extra protection against algae growth.
Application Process:
- Circulate Water: Ensure your pool’s pump and filter are running before adding the algicide.
- Distribute Evenly: Pour the required amount around the perimeter of the pool, ensuring even distribution.
- Filter Maintenance: Clean or backwash your filter regularly, especially after treating an algae outbreak.
Safety Tips:
- Read the Label: Always follow the label instructions for the product.
- Avoid Overuse: Overuse of algicide can lead to foam formation in the pool.
- Pool Re-Entry: Always wait for the recommended time (typically 15 minutes to an hour for maintenance doses) before swimming after adding the algicide.
Using the correct dosage of Pool Time MaxBlue Algicide helps keep your pool clean, clear, and algae-free throughout the swimming season.