The amount of drugs of reverse osmosis dirt depends on multiple factors, including water quality, scale and design of RO systems, and operating conditions, and specific dirt -resistant products. Generally speaking, the correct amount of medicine should be determined according to the actual situation, and it is best to follow the following steps:
The determination of the initial increase: According to the suggestions or formulas provided by the manufacturer, the initial increase in the proper downtale agent was determined. This is usually calculated based on the water production flow of the RO system, the quality of the water inlet, and the expected effect of the dirt.
Monitoring water quality and dirt resistance: According to the actual water quality, it is determined by periodic detection of water quality parameters (such as total solubility solids, hardness, alkali, etc.) and RO membrane performance to evaluate the stain resistance effect. Adjust the dosage according to the monitoring results to achieve the expected effect.
Pay attention to moderate adding medicine: Excessive or too low medicines may adversely affect the RO system. Excessive drugs may cause the problem of stain resistant or membrane pollution, while too low drugs cannot provide sufficient stain resistance effects. Therefore, pay attention to moderate adding medicines when adjusting the amount of drugs.
Continuous monitoring and adjustment: Regularly monitor the operating status and water quality parameters of the RO system, and adjust the amount of medicine in time according to the actual situation. Over time, it may need to be adjusted according to the season, water source change or other factors.
It should be noted that the specific amount of medicine should be determined according to the actual situation and the suggestions of the manufacturer. It is best to operate under the guidance of professionals and perform correct dosage in accordance with the product manual. Correctly fixed quantitative adding medicines can maximize the effect of the RO system and extend the service life of the equipment.