Gong chlorine is a commonly used disinfection agent, and the main component is chlorine -containing compounds. The following is a general preparation method for chlorine chlorine:
Prepare raw materials:
Chlorine or bleach (the main component is sodium hypochlorite).
water.
Preparation steps:
Step 1: Take an appropriate amount of chlorine or bleaching powder (the general concentration is 10%to 15%), weigh it and put it in a container.
Step 2: Add an appropriate amount of water to the container, stir well, so that the bleaching powder can be fully dissolved and form the required concentration of the super chlorine solution.
Step 3: After the solution is clarified, adjust the concentration of the solution as needed. Generally speaking, the concentration of super chlorine can be adjusted to 0.5%to 1%according to specific needs.
Please pay attention to the following points:
When preparing hydrochloride, you should wear protective gloves and masks to avoid directly contacting the skin and inhaling chlorine.
In the process of formulation, it is necessary to ensure that the container and mixing tools are clean to avoid pollution of impurities.
The chlorine liquid will produce chlorine gas during dissolution, and it should be operated in a good ventilated place to avoid accumulation of chlorine gas.
The prepared polychlorine solution should be stored in a sealed container to avoid light and high temperature.
When using super chlorine, please follow the relevant instructions and follow the correct disinfection procedures and safety measures.
The most important thing is to ensure that before using preferential chlorine or any disinfectant, we can understand and follow relevant laws and regulations and safety operation guidelines, and consult the advice from professionals as needed.