The following is an example of a common formula for organic phosphine scale and corrosion inhibitors:
Main ingredients:
Phenol compounds: 20-30%
Organic phosphine compounds: 10-20%
Surfactant: 5-10%
Auxiliary ingredients of corrosion inhibitor: appropriate amount
Water: surplus
The specific formula is as follows:
Add an appropriate amount of water to the mixing container as the base solvent.
Gradually add phenolic compounds and stir to dissolve evenly.
Add organic phosphine compounds and continue stirring to mix.
Add surfactant and keep stirring until it is thoroughly mixed and even.
Some corrosion inhibitor auxiliary components can be added to the formula, and adjustments and additions can be made as needed.
Check the pH and concentration of the formula solution and adjust as needed.
Finally, confirm the proportion and concentration of each component in the formula and adjust it to meet the requirements.
Filter and store the prepared organic phosphine scale and corrosion inhibitor in a sealed container.
Please note that the composition ratio and proportion of specific formulas may vary depending on different application purposes and materials. It is recommended to follow safe operating procedures during the preparation process, ensure proper storage and use of chemical substances, and comply with relevant laws, regulations, and environmental requirements. Before use, it is best to conduct laboratory testing and process validation to ensure that the prepared organic phosphine scale and corrosion inhibitor can meet specific needs.