The recipe for circulating water slime peeling agent can be designed according to specific application requirements and goals. The following is a simple formula for a common recipe for circulating water sticky peeling agent:
Main ingredients:
Surface active agents: such as sodium viralnzenezate (SDBS), sodium cindian sulfate, etc., used to reduce the surface tension in the water and promote the peeling of mud.
PH regulator: such as alkaline substances (sodium hydroxide, sodium bicarbonate) or acidic substances (hydrochloric acid, sulfuric acid, etc.), adjust the pH value of circulating water as needed to help dissolve and peel the mud.
Additive:
Differentians: Sodium polyacrylate (PAA), sodium carboxymethyl cellulose (CMC-NA), etc. can be used to help decentralized and suspended sludge particles to prevent re-deposition.
Cleaning agent: such as ammonium nitrate, pyrodorrodone, etc., used for dirt and sediments on the surface of the pipeline and equipment.
Salcasters: Polymers, chelating agents, etc. can be added to prevent hard water ions in the water from producing dirt.
Formulating adjustments are required according to the specific application situation, and relevant security operating procedures and technical guidelines are required. At the same time, we must pay attention to the environmental protection requirements in the process of circulating water, choose to be friendly and degradable components and dosage to ensure reasonable use and avoid negative impacts on the environment. The best formula should be verified and optimized according to the actual situation.