The method of recycling the potion for circulating water treatment varies according to the specific circulating water system and the type of pharmaceutical. The following is the step of the general circulating water treatment agent adding method:
Check the circulating water system: First, ensure the normal operation of the circulating water system, and evaluate and analyze the water quality. Understand the pH value, hardness, soluble solid content, microbial pollution and other parameters of the cycle water to determine the type and dose of the potion that need to be added.
Determine the types and dosage of the pharmaceutical agent: According to the results of water quality testing and specific requirements, select the appropriate circulating water treatment agent, and refer to the suggestion or instructions provided by the supplier.
Dilute in advance: Some potions may need to be diluted before they can be used. According to the instructions, the pharmaceuticals are diluted in advance to the appropriate concentration to facilitate the addition and mixing.
Add a potion: Add pre -diluted agents to the circulating water system on average. You can add it by using the measurement pump, pharmaceutical release system or manual release. Make sure the agent is evenly distributed in the entire circulating water system.
Mixed and cycle: Make sure the agent is fully mixed with circulatory water. This can be achieved by turning on the mixture, rotating flowing device or normal circulating water pump. Make sure the pharmaceuticals can be fully dispersed throughout the system.
Monitoring and adjustment: Regularly monitor and test cycle water to ensure the effect and water quality of the agent and water quality. According to the test results, the types and dosage of the pharmaceutical agent are adjusted, and the additional frequency is added to maintain the stable operation of the circulating water system.
Please note that when adding a potion, you need to comply with the corresponding safety operating procedures, and operate according to the safety data table and instruction manual of the agent. Make sure the appropriate protection measures are used to avoid direct contact with the agent. In addition, the waste liquid is reasonably handled and disposal to meet environmental protection requirements.