Skip to content
Water treatment agent researcher

Water treatment agent researcher

An interesting chemical engineer

Properties and Characteristics of the Sodium Salt of a Maleic-Acrylic Acid Copolymer (MA/AA·Na)

Posted on November 16, 2026 By admin No Comments on Properties and Characteristics of the Sodium Salt of a Maleic-Acrylic Acid Copolymer (MA/AA·Na)

The sodium salt of a maleic acid/acrylic acid copolymer (MA/AA·Na) is a water-soluble, phosphorus-free polycarboxylate dispersant. Its primary characteristics are excellent chelation of calcium and magnesium ions, strong dispersion of inorganic particles (particularly calcium carbonate), and good thermal stability. Publicly available information is largely sourced from supplier technical data sheets rather than independent peer-reviewed studies.

Key Properties
1. Chelation and Dispersion
The polymer’s carboxylate groups give it a strong affinity for hardness ions. As a detergent builder, it is described as having “excellent calcium-magnesium chelating ability and calcium carbonate dispersing power”. This dual function—tying up hardness ions while keeping particulate soils suspended—underlies its anti-redeposition effect in laundry applications.

2. Detergent Performance and Processing Benefits
In laundry powder formulations, MA/AA·Na is reported to improve detergency, enhance anti-ash deposition and anti-redeposition performance, and offer good pH buffering capacity that can reduce skin irritation. It also improves spray-drying slurry performance, allowing higher slurry concentration and producing particles with greater smoothness and strength while reducing fine powder content. Recommended dosage in detergent formulations is typically 1.0–2.0%.

3. Thermal Stability
Supplier sources state the product is suitable for high-temperature systems, including boilers and cooling water systems, with one source citing suitability for systems up to 120°C. This positions it for industrial water treatment where thermal degradation of the dispersant would otherwise be a concern.

4. Typical Specifications (Liquid and Solid Forms)
Values vary by supplier and product grade:

Items Index
Liquid Powder
Appearance Colorless to yellowish transparent liquid White powder
Solid content, % 40.0 min 92.0 min
Density (20℃), g/cm3 1.25min –
pH (as it) 8.0-10.0 8.0-10.0(1% water solution)
Viscosity(25 ℃), mPa • s 1000-2500 –
Moisture, % – 10 max

Data compiled from supplier listings.

Primary Applications
Industrial Water Treatment: Scale inhibitor/dispersant for cooling water systems and reverse osmosis membranes. Typical circulating cooling water dosage cited as 5–20 ppm.

Detergents: Anti-redeposition agent and processing aid in laundry powders; compatible with zeolite and layered silicate builders.

Textile Processing: Chelating dispersant in desizing, scouring, bleaching, and dyeing; protects H₂O₂ from metal-catalyzed decomposition and aids in removing unfixed dyes.

Other Dispersing Uses: Pigment slurries, ceramic slurries, paper coatings, and calcium carbonate powders.

Notes for Catalog/Technical Writing
If you are preparing catalog content for MA/AA·Na, consider the following:

Source limitation: Most performance claims (e.g., “excellent chelating ability,” “significant dispersion effect”) originate from supplier product pages. Independent validation is scarce in the search results. Avoid presenting these as independently verified facts.

Dosage figures are application-specific: The 1–2% detergent dosage and 5–20 ppm water treatment dosage come from supplier recommendations. Catalog copy should note that actual dosage depends on water hardness, system conditions, and formulation.

Molecular weight varies by grade: One source lists an average molecular weight of 50,000 for a specific product, but this is not a universal specification. Different manufacturing processes yield different molecular weights, which affect performance. Confirm the specification of your specific product before publishing.

Work Tags:MA-AA·Na

Post navigation

Previous Post: The Working Principle of 2-Phosphonobutane-1,2,4-Tricarboxylic Acid (PBTC)

Leave a Reply Cancel reply

You must be logged in to post a comment.

Categories

  • Biocide and Algicide
  • Built Scale & Corrosion Inhibitors and Pretreatment Filming Agents
  • Casual
  • Corrosion Inhibitors & Oxygen Scavenger
  • Corrosion Inhibitors & Oxygen Scavenger
  • Life
  • Phosphonates Antiscalants
  • Polycarboxylic Antiscalant and Dispersant
  • Reverse Osmosis Chemicals
  • Salts of Phosphonates
  • Salts of Phosphonates
  • Surfactant & Others
  • Uncategorized
  • Work

档案

  • November 2026
  • October 2026
  • September 2026
  • August 2026
  • July 2026
  • June 2026
  • May 2026
  • April 2026
  • March 2026
  • February 2026
  • January 2026
  • December 2025
  • November 2025
  • October 2025
  • September 2025
  • August 2025
  • July 2025
  • June 2025
  • May 2025
  • April 2025
  • March 2025
  • February 2025
  • January 2025
  • December 2024
  • November 2024
  • October 2024
  • September 2024
  • August 2024
  • July 2024
  • June 2024
  • May 2024
  • April 2024
  • March 2024
  • February 2024
  • January 2024
  • December 2023
  • November 2023
  • October 2023
  • September 2023
  • August 2023
  • July 2023
  • June 2023
HEDP的车间

Recent Posts

  • Properties and Characteristics of the Sodium Salt of a Maleic-Acrylic Acid Copolymer (MA/AA·Na)
  • The Working Principle of 2-Phosphonobutane-1,2,4-Tricarboxylic Acid (PBTC)
  • What is the future outlook for 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTC)?
  • The Use of Polyacrylic Acid Sodium Salt (PAAS) in Textile Printing and Dyeing
  • The Working Principle of Polyacrylic Acid Sodium Salt (PAAS)

Recent Comments

  1. admin on Is Food Additive Sodium Polyacrylate Harmful to Human Body

Copyright © 2026 Water treatment agent researcher.

Powered by PressBook WordPress theme